From Unofficial Stationeers Wiki
(Redirected from Kit (Furnace) Furnace)
|Created With||Autolathe, Fabricator|
|Cost||30g Iron, 10g Copper|
|Placed with||Kit (Furnace)|
|Placed on||Small Grid|
|Deconstructed with||Hand Drill|
|Item received||Kit (Furnace)|
Used to smelt ingots and alloys using an oxygen/volatile gas mix. Ice (Oxite) and Ice (Volatiles) can be manually input directly in the furnace in order to create crude gas mixtures, or to be directly extracted as an easy trick for melting the ice.
If the contents of the furnace are ejected without reaching the required temperature and pressure for smelting, they'll come out as Reagent which can be processed in a Centrifuge to recover the raw ores.
While smelting steel is easily achieved with ice, other recipes usually require a working piping setup. This can be done by separating gases into tanks using atmospheric units and piping individual gases through a mixer and a Pressure Regulator or a Pipe Volume Pump connected to the furnace input. Output should also be extracted and vented/recycled through a backpressure regulator to keep furnace pressure in check. The optimal gas mix that burns completely is 1 part (33.3%) oxygen to 2 parts (66.6%) volatiles, other mixes would also work but leave you with leftover oxygen or volatiles depending on the percentages used. It could also result in lower temperature if that is desired, but you could also use a volume pump with a lower fuel input setting.
Make sure to put the fuel in first, then press the activate button. Afterwards, put in the ingredients, and press the handle after you see the "will produce" while hovering over the furnace.
|Ingot||Input||Pressure (Pa)||Temperature (K)||Temperature (°C)|
|Silicon||Silicon||100 kPa||100 MPa||900K||99999K||627°C||99726°C|
|Iron||Iron||100 kPa||100 MPa||900K||99999K||627°C||99726°C|
|Gold||Gold||100 kPa||100 MPa||600K||99999K||327°C||99726°C|
|Copper||Copper||100 kPa||100 MPa||600K||99999K||327°C||99726°C|
|Silver||Silver||100 kPa||100 MPa||600K||99999K||327°C||99726°C|
|Lead||Lead||100 kPa||100 MPa||300K||99999K||27°C||99726°C|
|Nickel||Nickel||100 kPa||100 MPa||800K||99999K||527°C||99726°C|
|100 kPa||100 MPa||600K||99999K||327°C||99726°C|
|800 kPa||2.4 MPa||700K||10000K||427°C||9727°C|
|6 MPa||7 MPa||1200K||2000K||927°C||1727°C|
|100 kPa||10 MPa||1000K||1500K||727°C||1227°C|
|300 kPa||3.5 MPa||300K||2000K||27°C||1727°C|
|Update 0.2.2202.10040 - Fri 25/10/2019 /Recipes|
- Placing 7 ice(volatiles) and 7 ice(oxite) will bring pressure to 12000kpa and temp 2000k which is suitable for Invar after a short wait to cool, with no need to vent extra pressure.
- All other alloys can be achieved with 2 volatiles and 1 oxite
- If atmosphere inside and/or around furnace is too cold to melt ice, one can press 'activate' button to manually melt one ice per ignition attempt. Until all solid matter was melted the import slot will remain blocked.
Some example fuel mixes
|Prime||FAR||In: Mols||Result||Out: Mols|
|100 kPa||2:1||29||14||2 135||1 953||1||3||82||33|
|200 kPa||2:1||59||29||4 500||2 000||1||5||169||80|
|200 kPa||3:1||65||21||3 400||1 900||2||26||118||52|
|200 kPa||4:1||72||18||3 000||1 800||1||40||99||42|
|200 kPa||1:1||43||43||3 493||1 917||22||2||127||59|
|200 kPa||1:4||17||68||1 646||1 319||63||2||50||18|
|300 kPa||2:1||86||42||6 850||2 109||2||7||242||115|
|500 kPa||2:1||143||69||11 814||2 150||3||11||400||193|
Data Network Properties
These are all Data Network properties of this device.
These are all parameters, that can be written to with a Logic Writer, Batch Writer, or Integrated Circuit (IC10). The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.
|Parameter Name||Data Type||Description|
|Open||Boolean||Opens the Furnace, when set to 1. Closes it, when set to 0.|
|Activate||Boolean||Activates the Furnace, when set to 1.|
|Lock||Boolean||Locks the Furnace, when set to 1. Unlocks it when set to 0.|
|Setting||Float||(Unknown) Affects the Setting output.|
|Output Name||Data Type||Description|
|Open||Boolean||Returns whether the Furnace is open. (0 for no, 1 for yes)|
|Pressure||Float||Returns the pressure in the Furnace in kilo pascal.|
|Temperature||Float||Returns the temperature in the Furnace in kelvin.|
|Lock||Boolean||Returns whether the Furnace is locked.|
|Setting||Float||(Unknown) Affected by the Setting parameter.|
|Reagents||Float||Returns the amount of reagents (smeltable ores, not counting ice) in the Furnace, in grams.|
|RatioOxygen||Float||Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of oxygen in the Furnace.|
|RatioCarbonDioxide||Float||Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of carbon dioxide in the Furnace.|
|RatioNitrogen||Float||Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrogen in the Furnace.|
|RatioPollutant||Float||Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of pollutant in the Furnace.|
|RatioVolatiles||Float||Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of volatiles in the Furnace.|
|RatioWater||Float||Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of water in the Furnace.|
|Maximum||Integer||(Unknown) Returns 100.|
|Ratio||Float||(Unknown) Returns 0.5.|
|ImportQuantity||Float||Returns the amount of items in the import slot of the Furnace, which are currently smelted, in grams.|
|ImportSlotOccupant||Boolean||Returns whether there is something in the import slot of the Furnace, being smelted. (0 for no, 1 for yes)|
|ExportQuantity||Float||Returns the amount of items in the export slot of the Furnace, in grams. (Only briefly returns a value, when the Furnace is opened and items are exported.)|
|ExportSlotOccupant||Boolean||Returns whether there is something in the export slot of the Furnace. (Only briefly returns a value, when the Furnace is opened and items are exported.)|