Actions

Suit Storage

From Unofficial Stationeers Wiki

Revision as of 14:58, 7 August 2023 by TheSavageProdigy (talk | contribs) (Fixed Grammar)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Kit (Suit Storage)
ItemKitSuitStorage.png
Recipe
Created With Hydraulic Pipe Bender, Fabricator
Cost 15g Iron, 5g Copper, 5g Silver
Suit Storage
SuitStorage front.png
Construction
Placed with Kit (Suit Storage)
Placed on Free (forced right side up)
Stage 1
Deconstruction
Deconstructed with Hand Drill
Item received Kit (Suit Storage)


Description

Used to store the EVA Suit, Helmet, Headlamp, and Spacepack. If the suit storage is powered and has pipes connected with Oxygen [O2] or Propellant [N2], it will recharge the batteries (1kW charge rate + 50w Standby\Operating cost) and equalize the Air Tank Canister and the Propellant Tank Canister with the pipesystem inside it. The wastetank will be pumped out to the pipe connected to the waste outlet.
All pipes must be connected or it will error out, it will still charge the battery in error mode. It does not have internal pressure regulators, Must be connected to regulated O2/N2 supply.

Inputs/Outputs: Front Input is O2, Back Bottom Input is N2, and Top Back Output is Waste

Data Network Properties

These are all Data Network properties of this device.

Data Parameters

These are all parameters, that can be written to with a Logic Writer or a Batch Writer. The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.

Parameter Name Data Type Description
Setting Integer Inherited from pump class.
On Boolean Turns the device on, when set >= 1. Turns it off, when set to <1.

Data Outputs

These are all parameters, that can be read with a Logic Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Output Name Data Type Description
Power Boolean Returns whether the device is turned on and receives power. (0 for no, 1 for yes).
Error Boolean Returns whether the device is flashing an error. (0 for no, 1 for yes).
Setting Integer Inherited from pump class.
Maximum Integer Inherited from pump class.
Ratio Integer Inherited from pump class.
On Boolean Returns whether the device is turned on. (0 for no, 1 for yes)
RequiredPower Integer Returns the current amount of power, required by the device, in watts.

Data Slots

These are all parameters, that can be read with a Slots Reader. The outputs are listed in the order a Slots Reader's "VAR" setting cycles through them.

Number Name Description
0 Helmet
1 Suit
2 Back
Name Data Type Description
All
Occupied Boolean Returns whether the slot occupied. (0 for no, 1 for yes).
OccupantHash Integer Returns ItemHash of item in slot.
MaxQuantity Integer Size of stack.
Damage Integer Item durability in percent.
Class Integer Item class ID.
Quantity Integer Size of stack.
PrefabHash Integer Returns ItemHash of item in slot.
Suit
ChargeRatio Integer Percent charge in 0-1.
Charge Integer Charge in Joules.
PressureWaste Integer Pressure of wastetank.
PressureAir Integer Pressure of airtank.
Back
Pressure Integer Pressure of Jettank.