Actions

Combustion Centrifuge

From Unofficial Stationeers Wiki

(Redirected from Kit (Combustion Centrifuge))


Kit (Combustion Centrifuge)
KitStructureCombustionCentrifuge.png
Constructing Options Combustion Centrifuge
Properties
Stacks No
Recipes
Autolathe (Tier Two) 20g Steel, 10g Invar, 5g Constantan
Logic
Item Hash 231903234
Item Name KitStructureCombustionCentrifuge
Logic Classes
SlotClass.None
SortingClass.Kits
Combustion Centrifuge
StructureCombustionCentrifuge.png
Operation
Power Usage 50W
Construction
Placed with Kit (Combustion Centrifuge)
Placed on Small Grid
Stage 1
StructureCombustionCentrifuge BuildState0.png
Deconstruction
Deconstructed with Hand Drill
Item received Kit (Combustion Centrifuge)
Stage 2
StructureCombustionCentrifuge BuildState1.png
Next Stage Construction
Constructed with tool Welder
Constructed with item 2x Steel Sheets
Deconstruction
Deconstructed with Angle Grinder
Item received 2x Steel Sheets
Stage 3
Next Stage Construction
Constructed with item 1x Cable Coil
Deconstruction
Deconstructed with Wire Cutters
Item received 1x Cable Coil
The Combustion Centrifuge is a gas powered version of the Centrifuge. If a Recycler or unbalanced Furnace outputs reagent mixture rather than the desired ingots, a centrifuge allows you to reclaim the raw ore.

It also refines Dirty Ore produced from the Deep Miner and Dirty Ore produced from the Rocket Miner. A combustible fuel mix should be supplied to the gas input, and waste gasses should be vented from the output. The machine's RPMs must be controlled via the throttle and combustion limiter levers. If the Combustion Centrifuge gains, or loses, RPMs too fast it will experience stress, and eventually grind to a halt. Higher RPMs directly result in faster processing speeds. The throttle lever controls the amount of fuel being pulled into the machine, increasing the temperature inside the engine, and leading to an increase in RPM. The limiter lever influences the speed of the combustion, and how much uncombusted gas is in the exhaust. Ejecting ore from the Combustion Centrifuge while it is at high RPMs will result in additional stress build up. If turned off while not stressed, the machine will automatically start to brake, and reduce RPMs in a controlled manner.

- Stationpedia

Description[edit]

The combustion centrifuge is a gas powered version of the Centrifuge. A combustible fuel mix should be supplied to the gas input, and waste gasses should be vented from the output. The machine's RPM's must be controlled via the throttle and combustion limiter levers. If the Combustion Centrifuge gains, or loses, RPMs too fast it will experience stress, and eventually grind to a halt. Higher RPMs directly result in faster processing speeds.

The throttle lever controls the amount of fuel being pulled into the machine, increasing the temperature inside the engine, and leading to an increase in RPM. The limiter lever influences the speed of combustion, and how much uncombusted gas is in the exhaust.

Ejecting ore from the Combustion Centrifuge while it is at high RPMs will result in additional stress build up. If turned off, while not stressed, the machine will automatically start to brake, and reduce RPMs in a controlled manner.

The Combustion Centrifuge has a socket for an IC10 chip, similar to the Atmospherics machine. It comes with two device ports, d0 and d1, for connecting to other devices. To change or set a device, use a screwdriver to cycle through devices found on the machine's data network.

Important[edit]

Can be boosted by Nitrous Oxide in fuel mixture, but don't make mixture to autoigniting, you can blow everything up with overpressured Gas Canister(perhaps, centrifuge too)!

Throttle[edit]

Every tick up to 0.01 moles of gas will be pulled in to the machine from the input pipe network. The Throttle parameter linearly controls how much gas to pull in, inputMoles = 0.01*Throttle/100. The Throttle value is rounded to the nearest multiple of 10 when set over the Data Network.

Combustion Limiter[edit]

On each tick the Combustion Centrifuge will manually combust up to 75% of the fuel mixture in its internal atmosphere. This happens on the remaining fuel after natural combustion takes place as described in Volatiles. The portion of fuel manually combusted each tick is clamp((Limiter/10)^2 * 0.0075, 0.001, 1). The Combustion Limiter value is rounded to the nearest multiple of 10 when set over the Data Network.

Data Network Properties[edit]

These are all Data Network properties of this device.

Data Parameters[edit]

These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10), and can be read with a Logic Reader, Batch Reader, or Integrated Circuit (IC10).

Click here to see/hide all the data network properties
Template:Slots
Slot Name Type Index
Import None 0
Export None 1
Programmable Chip Programmable Chip 2

Template:Connections

Connection Name Index
Chute Input 0
Chute Output 1
Data 2
Power 3
Pipe Input 4
Pipe Input 5