Actions

Circuitboard (Airlock)

From Unofficial Stationeers Wiki

Revision as of 22:22, 15 June 2019 by Ipottinger (talk | contribs) (Settings)


Circuitboard (Airlock)
Circuitboard door control.jpg
Properties
Stacks No
Paintable No
Recipe
Created With Electronics Printer, Fabricator

Description

A Circuitboard (Airlock) can be used to automate the operation of an airlock separating a pressurized enviroment from a (near) vacuum. Guide (Airlock) Atmosphere to Vacuum provides additional information regarding the function, construction, and operation of airlock using a Circuitboard (Airlock).

A Circuitboard (Advanced Airlock) might serve as a suitable substitution, offering support for two pressurized atmospheres and Console Slaves, but requires a more complex construction.

Characteristics

  • Its settings will refer to the pressurized environment as "interior" and the vacuum environment as "exterior".
  • Its pressurization phase will stall if there is not enough gas available to the selected Active Vents to reach the set 101 Pa.
  • Its depressurization phase will stall if a complete vacuum cannot be achieved within the Large Grid Volumes in which all selected Gas Sensors reside.
  • When powered, all selected Portals and Active Vents will be locked, preventing their manual use even when power is subsequently denied.
  • Supports multiple "interior" Active Vents
  • Supports multiple Gas Sensors
  • Does not supports additional Console Slaves

User Interface

A powered Console equipped with a Circuitboard (Airlock) and will display the following user interface:

Name Type Function
Cancel Depressurize Console button Cancel depressurization and proceed to repressurization (Warning: Atmospheric loss may occur)
Cancel Pressurize Console button Cancel pressurization and opens door
Emergency Override Console button Unused
Cycle to Exterior Console button Begin airlock operations to allow access to Exterior environment
Cycle to Interior Console button Begin airlock operations to allow access to Interior environment

Settings

A powered Console equipped with a Circuitboard (Airlock) and an inserted Data Disk will display the following settings:

Name Description
«Portal» EXTERNAL Designates one portal to exterior environment
«Portal» INTERNAL Designates one portal to interior environment
«Active Vent» VENT Designates one or more Active Vents for interior atmosphere
«Gas Sensor» SENSOR Designates one or more Gas Sensors for airlock pressure measurements
«Light» LIGHT Designates one or more Lights to be activated only during airlock operation

Manufacture

Circuitboard (Advanced Airlock)'s are manufactured using:

Manufacturer Requirements
Electronics Printer #J Power, #g Ore 1, #g Ore 2
Fabricator #J Power, #g Ore 1,##g Ore 2

Recycling

Circuitboard (Airlock)'s can be recycled using a Recycler in conjunction with a Centrifuge to yield #g Ore 1 and #g Ore 2

Destruction

Circuitboard (Advanced Airlock)'s can be destroyed using a Arc Furnace, a Furnace or with multiple shots from a Weapon

See Also