Kit (Gas Fuel Generator)
From Unofficial Stationeers Wiki
Revision as of 16:34, 4 December 2021 by 216.213.130.255 (talk) (tip for trouble shooting when GFG shorts out)
Revision as of 16:34, 4 December 2021 by 216.213.130.255 (talk) (tip for trouble shooting when GFG shorts out)
Recipe | |
---|---|
Created With | Fabricator,Electronics Printer |
Cost | 50x Iron, 10x Copper |
Construction | |
---|---|
Placed with | Kit (Gas Fuel Generator) |
Placed on | Small Grid |
Stage 1 | |
Deconstruction | |
Deconstructed with | Hand Drill |
Item received | Kit (Gas Fuel Generator) |
Description
As the big brother of the Portable Generator the Gas Generator requires fuel and outputs crazy amounts of power if you don't throttle it's gas input.
Notes
- Use a pressure regulator on the input and start it as low as 1kpa, recommended to connect to a Kit (Battery) and to automate it as backup power.
- Can be used in conjunction with a Electrolyzer to generate it's fuel.
- Requires to be placed in an atmosphere to work. Minimum pressure of 20 kPA and temperature ranging between 278-328 degrees Kelvin (5-55 Celsius)
- With a good fuel mix (33/64 O/H2) can generate up to 80kW.
- If allowed to accumulate fuel (by leaving the pressure regulator on) it will cause shorts in power circuits as it tries to consume the amount that has built up. This is evident by the gauge on the front which will rapidly rise into the red. This can be resolved by running the generator without connecting it to power circuits, and with the regulator off until all fuel has been burned.
Data Network Properties
These are all Data Network properties of this device.
Data Parameters
These are all parameters, that can be written to with a Logic Writer or a Batch Writer. The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.
Parameter Name | Data Type | Description |
---|---|---|
Setting | Float | (Unknown) Affects the Setting output. |
On | Boolean | Turns the Gas Generator on, when set to 1. Turns it off, when set to 0. |
Data Outputs
These are all parameters, that can be read with a Logic Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.
Output Name | Data Type | Description |
---|---|---|
Power | Boolean | Returns whether the Gas Generator is turned on and receives power. (0 for no, 1 for yes) |
Error | Boolean | Returns whether the Gas Generator is flashing an error. (0 for no, 1 for yes) |
Pressure | Float | Returns the pressure in the Gas Generator in kilo pascal. |
Temperature | Float | Returns the temperature in the Gas Generator in kelvin. |
Setting | Float | (Unknown) Affected by the Setting parameter. |
RatioOxygen | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of oxygen in the Gas Generator. |
RatioCarbonDioxide | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of carbon dioxide in the Gas Generator. |
RatioNitrogen | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrogen in the Gas Generator. |
RatioPollutant | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of pollutant in the Gas Generator. |
RatioVolatiles | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of volatiles in the Gas Generator. |
RatioWater | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of water in the Gas Generator. |
Maximum | Integer | (Unknown) Returns 100. |
Ratio | Float | (Unknown) Returns 0.5. |
On | Boolean | Returns whether the Gas Generator is turned on. (0 for no, 1 for yes) |