Sleeper

Kit (Sleeper)

Recipe
Created With	Fabricator
Cost	10g Iron, 2g Gold, 3g Copper

Sleeper

Construction
Placed with	{{{placed_with_item}}}
Placed on	{{{placed_on_grid}}}

Description

Once properly setup and maintained, allows for controlled sleep giving a safe place to log off.
No surrounding atmosphere needed to operate, can go in with full suit and open visor to use.

Basic Setup Example

• Build the Filtration, put in oxygen filter so it throws out the rest
• On the output build a Gas Tank Storage or similar.
• And a Pressure Regulator to feed a constant pressure to the sleeper (27-100kpa).
• Passive Vent or similar to eject the co2 from the waste output.

• Wire it up.
• put your suit airtank in the system (will use 4000kpa from it to charge the pipes).
• Then turn on and jump in for a good nights rest.

This design works because the sleeper connector is bidirectional,
and it needs a constant trickle of air flowing to draw out the co2 and clean it up.

Once you build larger systems you might want to feed the air at a proper temperature too,
but fresh spawned characters have 20c oxygen tanks.