Unofficial Stationeers Wiki Unofficial Stationeers Wiki

Kit (Cryotube)

Recipe
Created With	Hydraulic Pipe Bender MK2
Cost	10g Gold, 10g Copper, 35g Steel, 5g Silver

Cryotube

Operation
Power Usage	10-260W
Construction
Placed with	Kit (Cryotube)
Placed on	Small Grid
Stage 1
Deconstruction
Deconstructed with	Hand Drill
Item received	Kit (Cryotube)

Description

A Cryotube can heal players and organs as well as revive dead players, the cryotube also functions as a sleeper, has one gas input, one liquid input, one power connection and one data connection.

Healing/reviving players

The cryotube needs at least 10L of pure liquid nitrogen below 130 K (-143.15 °C) in its liquid input network to heal/revive players.

Players are revived at 25% health and healed at a rate of 1 damage/tick.

Practical considerations

The cryotube has a considerable internal volume of 800 L, which exchanges gases with the room when open and with the gas input network when closed. Operation will result in cross-contamination between its gas input network and room atmospheres, and operating the cryotube on a high-pressure gas network will result in significant loss of gas when the door is opened.

The internal atmosphere will exchange heat with the liquid input at a rate of 100 W during normal operation. This will likely result in the input network requiring active cooling for long periods of operation, and may result in undesired cooling of its input atmosphere. This heat exchange stops once the internal atmosphere reaches 0°C. A 250W resistive heating element prevents condensation/freezing by targeting an internal temperature of 4°C.

The stationeer must remove all of their items to get into the cryotube so it should be in a room with a breathable atmosphere.

Data Network Properties

These are all Data Network properties of this device.

⚠️ This section is known to be incomplete. Please be bold and edit it to include any additional data you may have found. ⚠️

Data Parameters

These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).

Parameter Name	Data Type	Description
Open	Boolean	Opens the CryoTube, when set to 1. Closes it, when set to 0.
On	Boolean	Turns the CryoTube on, when set to 1. Turns it off, when set to 0.

Data Outputs

These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Output Name	Data Type	Description
Power	Boolean	Returns whether the CryoTube is turned on and receives power. (0 for no, 1 for yes)
Open	Boolean	Returns whether the CryoTube is open. (0 for no, 1 for yes)
Error	Boolean	Returns whether the CryoTube is flashing an error. (0 for no, 1 for yes)
On	Boolean	Returns whether the CryoTube is turned on. (0 for no, 1 for yes)
RequiredPower	Integer	Returns the current amount of power, required by the CryoTube, in watts.