Unofficial Stationeers Wiki Unofficial Stationeers Wiki

Kit (Logic Transmitter)

Properties
Stacks	Yes (5)

Logic Transmitter

Mounted Logic Transmitter
Operation
Power Usage	50W
Prefab Hash	-693235651
Construction
Placed with	Kit (Logic Transmitter)
Placed on	Small Grid, On Frames
Stage 1
Deconstruction
Deconstructed with	Hand Drill
Item received	Kit (Logic Transmitter)

Description

The Logic Transmitter are used to transmit values in a logic network wirelessly.

The Logic Transmitter starts in Passive mode and can be tied to Active transmitters, AIMEe, Hardsuit and Rover. While tied to anything but another Logic Transmitter is basically acts like a Logic Mirror Logic Mirror, but from far distance.

If you set a Logic Transmitter to active you can write to the Setting variable on it to transmit that value to one or multiple Logic Transmitter that are tied to it in passive mode. You tie a passive Logic Transmitter to a passive Logic Transmitter by adjusting the screw on the passive Logic Transmitter until it matches the name of the active Logic Transmitter. NOTE: The active Logic transmitter must be on and active in order for it to show up as an option in the screw of the passive Logic Transmitter. You can then read the Setting variable from the passive Logic Transmitter.

This is the toggle button that can be manually used to change the Logic Transmitter Mode:

Note

• There seems to be no limit to the distance at which two devices can connect.
• The Logic Transmitter have three data input ports and one for power. Due the fact that when the Logic Transmitter is in Active is used to mirror a signal from another Logic Transmitter, seems that all of the three input ports are not necessary on the same network (because they are all or output or input), but can be used for share the same value in different networks without mix logic networks and/or have to build many Logic Transmitter for recieve the same value.
• The placed object prefabhash is -693235651.

Data Network Properties

These are all Data Network properties of this device.

Data Parameters

These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).

Parameter Name	Data Type	Description
On	Boolean
Mode	Boolean	0 for Passive, 1 for Active
Setting	Any	Any setted o mirrored value from another device

Data Outputs

These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Output Name	Data Type	Description
On	Boolean	If is enabled
Mode	Boolean	0 for *Passive*, 1 for *Active*
Power	Boolean	If is taking power
PrefabHash	Integer	-693235651
RequiredPower	Integer	Power required to work (50W)
Setting	Any	Any setted o mirrored value from another device