Advanced Furnace
From Unofficial Stationeers Wiki
Revision as of 06:08, 25 February 2021 by Autom8it (talk | contribs) (Reverted last edit. Moonwish is mistaken. The reason the fuel in the input pipe would combust after activation is that fuel will auto-ignite at 32C. Activation causes the furnace to heat up which will heat the surrounding air and pipes.)
Revision as of 06:08, 25 February 2021 by Autom8it (talk | contribs) (Reverted last edit. Moonwish is mistaken. The reason the fuel in the input pipe would combust after activation is that fuel will auto-ignite at 32C. Activation causes the furnace to heat up which will heat the surrounding air and pipes.)
 | |
| Constructing Options | Advanced Furnace |
|---|---|
| Properties | |
| Stacks | No |
| Recipe | |
| Created With | Electronics Printer Mk. II |
| Cost | 8g Solder, 5g Gold, 6g Silicon, 25g Copper, 30g Steel, 15g Electrum |
| Construction | |
|---|---|
| Placed with | Kit (Advanced Furnace) |
| Placed on | Small Grid |
Description
The Advanced Furnace is used to create advanced alloys, but can be used to create basic alloys as well. It lends itself to automation. The Maximum pressure for the furnace is 60 MPa before the furnace will,in short order, explode. I have also found that adding Hydrocarbons, IE coal, will increase the pressure. Contains volume pumps to control flow in and out.
Recipes
| Ingot | Input | Pressure (Pa) | Temperature (K) | Temperature (°C) | |||
|---|---|---|---|---|---|---|---|
| Min | Max | Min | Max | Min | Max | ||
 |
   |
30 MPa | 40 MPa | 1kK | 100kK | 727°C | 99727°C |
 |
  |
25 MPa | 30 MPa | 950K | 1kK | 677°C | 727°C |
 |
 |
23.5 MPa | 24 MPa | 600K | 100kK | 327°C | 99727°C |
 |
 |
50 MPa | 100 MPa | 400K | 800K | 127°C | 527°C |
 |
 |
10 MPa | 20 MPa | 1.8kK | 100kK | 1527°C | 99727°C |
| Update 0.2.2728.13232 - Fri 15/01/2021 /Recipes | |||||||
| NOTE: January StationEARS update reduced the yields from smelting super alloys. Recipes will now return only 1 ingot. | |||||||
Data Network Properties
These are all Data Network properties of this device.
Data Parameters
These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).
| Parameter Name | Data Type | Description |
|---|---|---|
| On | Boolean | Turns the Advanced Furnace on, when set to 1. Turns it off, when set to 0. |
| Lock | Boolean | |
| ClearMemory | Integer? | Writing on this Parameter will reset the ExportCount and ImportCount values to zero. |
| Activate | Boolean | Activates the Advanced Furnace, when set to 1. Deactivates the Advanced Furnace, when set to 0. Note: This can cause a minor bug to occur. (See Bugs) |
| SettingOutput | Float | Set outlet volume pump pressure. |
| SettingInput | Float | Set inlet volume pump pressure. |
| Setting | Float | (Unknown) Affected by the Setting parameter. |
| Open | Boolean | Returns whether the Furnace is open. (0 for no, 1 for yes) |
Data Outputs
These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.
| Output Name | Data Type | Description |
|---|---|---|
| Maximum | Float | |
| Lock | Boolean | |
| ImportCount | Integer | Incremented each time an item stack enter by the Import slot |
| ExportCount | Integer | Incremented each time an item stack exit by the Export Slot |
| Error | Boolean | |
| Activate | Boolean | 1 if empty, 0 if something is inside the Furnace. When set to 0 The player can use the lever to clear the Furnace |
| Temperature | Float | Returns the temperature in the Furnace in kelvin. |
| SettingOutput | Float | Set outlet volume pump pressure. |
| SettingInput | Float | Set inlet volume pump pressure. |
| Setting | Float | (Unknown) Affected by the Setting parameter. |
| RequiredPower | Integer | In watts. The Advanced Furnace requires 289W to operate. |
| RecipeHash | Integer | Reads recipehash of selected recipe. Can be output to Hash Reader Monitor. Number is calculated using hash on prefabname |
| Reagents | Float | Returns the amount of reagents (smeltable ores, not counting ice) in the Furnace, in grams. |
| RatioWater | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of water in the Furnace. |
| RatioVolatiles | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of volatiles in the Furnace. |
| RatioPollutant | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of pollutant in the Furnace. |
| RatioOxygen | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of oxygen in the Furnace. |
| RatioNitrousOxide | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrous oxide in the Furnace. |
| RatioNitrogen | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrogen in the Furnace. |
| RatioCarbonDioxide | Float | Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of carbon dioxide in the Furnace. |
| Ratio | Float | (Unknown) Returns 0.5. |
| Pressure | Float | Returns the pressure in the Furnace in kilo pascal. |
| PrefabHash | Float | Hash ID of the Stacker. |
| Power | Boolean | Returns whether the Advanced Furnace is on (0 for no, 1 for yes) |
| Open | Boolean | Returns whether the Furnace is open. (0 for no, 1 for yes) |
| On | Boolean |