Difference between revisions of "Pipe Volume Pump"
From Unofficial Stationeers Wiki
(Experimented with volume pump as valve and it Blocked the flow resulting in an early version of the normal valve) |
m (Added a note regarding the valve units (They are actually a flow rate with respect to time, not a volume).) |
||
| Line 16: | Line 16: | ||
Used to pump gasses throughout a pipe, featuring an adjustable valve 0-100 Liters and requiring power (8W per Liter). All the gasses in the pipes behind it will be completely pushed in front of it when powered, and blocks any flow of gasses in either direction when unpowered. | Used to pump gasses throughout a pipe, featuring an adjustable valve 0-100 Liters and requiring power (8W per Liter). All the gasses in the pipes behind it will be completely pushed in front of it when powered, and blocks any flow of gasses in either direction when unpowered. | ||
| + | Note that valve settings are for the rate at which the pump operates, in volume per unit of time. The time unit is not indicated and is most likely in seconds. | ||
{{Data Network Header}} | {{Data Network Header}} | ||
Revision as of 09:24, 15 January 2021
 | |
| Properties | |
|---|---|
| Stacks | Yes (5) |
| Recipe | |
| Created With | Hydraulic Pipe Bender, Fabricator |
| Cost | 5g Iron, 2g Gold, 3g Copper |
Description
Used to pump gasses throughout a pipe, featuring an adjustable valve 0-100 Liters and requiring power (8W per Liter). All the gasses in the pipes behind it will be completely pushed in front of it when powered, and blocks any flow of gasses in either direction when unpowered.
Note that valve settings are for the rate at which the pump operates, in volume per unit of time. The time unit is not indicated and is most likely in seconds.
Data Network Properties
These are all Data Network properties of this device.
Data Parameters
These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).
| Parameter Name | Data Type | Description |
|---|---|---|
| Lock | Boolean | |
| Setting | ||
| On | Boolean |
Data Outputs
These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.
| Output Name | Data Type | Description |
|---|---|---|
| Maximum | ||
| Lock | Boolean | |
| Error | ||
| Setting | ||
| RequiredPower | ||
| Ratio | ||
| PrefabHash | ||
| Power | ||
| On |