Combustion Centrifuge

Kit (Combustion Centrifuge)

Constructing Options	Combustion Centrifuge
Properties
Stacks	No
Recipes
Autolathe (Tier Two)	20g Steel, 10g Invar, 5g Constantan
Logic
Item Hash	231903234
Item Name	KitStructureCombustionCentrifuge
Logic Classes	SlotClass.None SortingClass.Kits

Combustion Centrifuge

Operation
Power Usage	50W
Construction
Placed with	Kit (Combustion Centrifuge)
Placed on	Small Grid
Stage 1
Deconstruction
Deconstructed with	Hand Drill
Item received	Kit (Combustion Centrifuge)
Stage 2
Next Stage Construction
Constructed with tool	Welder
Constructed with item	2x Steel Sheets
Deconstruction
Deconstructed with	Angle Grinder
Item received	2x Steel Sheets
Stage 3
Next Stage Construction
Constructed with item	1x Cable Coil
Deconstruction
Deconstructed with	Wire Cutters
Item received	1x Cable Coil

The Combustion Centrifuge is a gas powered version of the Centrifuge. If a Recycler or unbalanced Furnace outputs reagent mixture rather than the desired ingots, a centrifuge allows you to reclaim the raw ore.

It also refines Dirty Ore produced from the Deep Miner and Dirty Ore produced from the Rocket Miner. A combustible fuel mix should be supplied to the gas input, and waste gasses should be vented from the output. The machine's RPMs must be controlled via the throttle and combustion limiter levers. If the Combustion Centrifuge gains, or loses, RPMs too fast it will experience stress, and eventually grind to a halt. Higher RPMs directly result in faster processing speeds. The throttle lever controls the amount of fuel being pulled into the machine, increasing the temperature inside the engine, and leading to an increase in RPM. The limiter lever influences the speed of the combustion, and how much uncombusted gas is in the exhaust. Ejecting ore from the Combustion Centrifuge while it is at high RPMs will result in additional stress build up. If turned off while not stressed, the machine will automatically start to brake, and reduce RPMs in a controlled manner.

- Stationpedia

Description

The combustion centrifuge is a gas powered version of the Centrifuge. A combustible fuel mix should be supplied to the gas input, and waste gasses should be vented from the output. The machine's RPM's must be controlled via the throttle and combustion limiter levers. If the Combustion Centrifuge gains, or loses, RPMs too fast it will experience stress, and eventually grind to a halt. Higher RPMs directly result in faster processing speeds.

The throttle lever controls the amount of fuel being pulled into the machine, increasing the temperature inside the engine, and leading to an increase in RPM. The limiter lever influences the speed of combustion, and how much uncombusted gas is in the exhaust.

Ejecting ore from the Combustion Centrifuge while it is at high RPMs will result in additional stress build up. If turned off, while not stressed, the machine will automatically start to brake, and reduce RPMs in a controlled manner.

The Combustion Centrifuge has a socket for an IC10 chip, similar to the Atmospherics machine. It comes with two device ports, d0 and d1, for connecting to other devices. To change or set a device, use a screwdriver to cycle through devices found on the machine's data network.

Important

Can be boosted by Nitrous Oxide in fuel mixture, but don't make mixture to autoigniting, you can blow everything up with overpressured Gas Canister(perhaps, centrifuge too)!

Throttle

Every tick up to 0.01 moles of gas will be pulled in to the machine from the input pipe network. The Throttle parameter linearly controls how much gas to pull in, inputMoles = 0.01*Throttle/100. The Throttle value is rounded to the nearest multiple of 10 when set over the Data Network.

Combustion Limiter

On each tick the Combustion Centrifuge will manually combust up to 75% of the fuel mixture in its internal atmosphere. This happens on the remaining fuel after natural combustion takes place as described in Volatiles. The portion of fuel manually combusted each tick is clamp((Limiter/10)^2 * 0.0075, 0.001, 1). The Combustion Limiter value is rounded to the nearest multiple of 10 when set over the Data Network.

Data Network Properties

These are all Data Network properties of this device.

Data Parameters

These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10), and can be read with a Logic Reader, Batch Reader, or Integrated Circuit (IC10).

Click here to see/hide all the data network properties

Parameter Name	Data Type	Access	Value	Description
Power	Boolean	Read	0	Unpowered	Can be read to return if the Combustion Centrifuge is correctly powered or not, set via the power system, return 1 if powered and 0 if not
			1	Powered
Open	Integer	Read Write	0	Closed	1 if device is open, otherwise 0
			1	Open
Error	Boolean	Read	0		1 if device is in error state, otherwise 0
			1	Error
Pressure	Float	Read			The current pressure reading of the Combustion Centrifuge
Temperature	Integer	Read			The current temperature reading of the Combustion Centrifuge
Lock	Boolean	Read Write	0	Unlocked	Disable manual operation of the Combustion Centrifuge.
			1	Locked
Reagents	Integer	Read			Total number of reagents recorded by the Combustion Centrifuge
RatioOxygen	Float	Read	0.0 to 1.0		The ratio of Oxygen in device atmosphere
RatioCarbonDioxide	Float	Read	0.0 to 1.0		The ratio of Carbon Dioxide in device atmosphere
RatioNitrogen	Float	Read	0.0 to 1.0		The ratio of Nitrogen in device atmosphere
RatioPollutant	Float	Read	0.0 to 1.0		The ratio of Pollutant in device atmosphere
RatioVolatiles	Float	Read	0.0 to 1.0		The ratio of Volatiles in device atmosphere
RatioWater	Float	Read	0.0 to 1.0		The ratio of Water in device atmosphere
On	Boolean	Read Write	0	Off	The current state of the Combustion Centrifuge.
			1	On
RequiredPower	Integer	Read			Idle operating power quantity, does not necessarily include extra demand power
ClearMemory	Integer	Write			When set to 1, clears the counter memory (e.g. ExportCount). Will set itself back to 0 when actioned
ExportCount	Integer	Read			How many items exported since last ClearMemory
ImportCount	Integer	Read			How many items imported since last ClearMemory
TotalMoles	Float	Read			Returns the total moles of the Combustion Centrifuge
RatioNitrousOxide	Float	Read	0.0 to 1.0		The ratio of Nitrous Oxide in device atmosphere
PrefabHash	Integer	Read			The hash of the structure
Combustion	Boolean	Read	0 or 1		Assess if the atmosphere is on fire. Returns 1 if atmosphere is on fire, 0 if not.
PressureInput	Float	Read			The current pressure reading of the Combustion Centrifuge's Input Network
TemperatureInput	Float	Read			The current temperature reading of the Combustion Centrifuge's Input Network
RatioOxygenInput	Float	Read	0.0 to 1.0		The ratio of Oxygen in device's input network
RatioCarbonDioxideInput	Float	Read	0.0 to 1.0		The ratio of Carbon Dioxide in device's input network
RatioNitrogenInput	Float	Read	0.0 to 1.0		The ratio of Nitrogen in device's input network
RatioPollutantInput	Float	Read	0.0 to 1.0		The ratio of Pollutant in device's input network
RatioVolatilesInput	Float	Read	0.0 to 1.0		The ratio of Volatiles in device's input network
RatioWaterInput	Float	Read	0.0 to 1.0		The ratio of Water in device's input network
RatioNitrousOxideInput	Float	Read	0.0 to 1.0		The ratio of Nitrous Oxide in device's input network
TotalMolesInput	Float	Read			Returns the total moles of the Combustion Centrifuge's Input Network
PressureOutput	Float	Read			The current pressure reading of the Combustion Centrifuge's Output Network
TemperatureOutput	Float	Read			The current temperature reading of the Combustion Centrifuge's Output Network
RatioOxygenOutput	Float	Read	0.0 to 1.0		The ratio of Oxygen in device's Output network
RatioCarbonDioxideOutput	Float	Read	0.0 to 1.0		The ratio of Carbon Dioxide in device's Output network
RatioNitrogenOutput	Float	Read	0.0 to 1.0		The ratio of Nitrogen in device's Output network
RatioPollutantOutput	Float	Read	0.0 to 1.0		The ratio of Pollutant in device's Output network
RatioVolatilesOutput	Float	Read	0.0 to 1.0		The ratio of Volatiles in device's Output network
RatioWaterOutput	Float	Read	0.0 to 1.0		The ratio of Water in device's Output network
RatioNitrousOxideOutput	Float	Read	0.0 to 1.0		The ratio of Nitrous Oxide in device's Output network
TotalMolesOutput	Float	Read			Returns the total moles of the Combustion Centrifuge's Output Network
CombustionInput	Boolean	Read	0 or 1		Assess if the atmosphere is on fire. Returns 1 if device's input network is on fire, 0 if not.
CombustionOutput	Boolean	Read	0 or 1		Assess if the atmosphere is on fire. Returns 1 if device's Output network is on fire, 0 if not.
CombustionLimiter	Integer	Read Write			Retards the rate of combustion inside the machine (range: 0-100), with 0 being the slowest rate of combustion and 100 being the fastest
Throttle	Integer	Read Write			Increases the rate at which the machine works (range: 0-100)
Rpm	Integer	Read			The number of revolutions per minute that the Combustion Centrifuge's spinning mechanism is doing
Stress	Integer	Read			Machines get stressed when working hard. When Stress reaches 100 the machine will automatically shut down
RatioLiquidNitrogen	Float	Read	0.0 to 1.0		The ratio of Liquid Nitrogen in device atmosphere
RatioLiquidNitrogenInput	Float	Read	0.0 to 1.0		The ratio of Liquid Nitrogen in device's input network
RatioLiquidNitrogenOutput	Float	Read	0.0 to 1.0		The ratio of Liquid Nitrogen in device's Output network
RatioLiquidOxygen	Float	Read	0.0 to 1.0		The ratio of Liquid Oxygen in device's Atmosphere
RatioLiquidOxygenInput	Float	Read	0.0 to 1.0		The ratio of Liquid Oxygen in device's Input Atmosphere
RatioLiquidOxygenOutput	Float	Read	0.0 to 1.0		The ratio of Liquid Oxygen in Combustion Centrifuge's Output Atmosphere
RatioLiquidVolatiles	Float	Read	0.0 to 1.0		The ratio of Liquid Volatiles in device's Atmosphere
RatioLiquidVolatilesInput	Float	Read	0.0 to 1.0		The ratio of Liquid Volatiles in device's Input Atmosphere
RatioLiquidVolatilesOutput	Float	Read	0.0 to 1.0		The ratio of Liquid Volatiles in Combustion Centrifuge's Output Atmosphere
RatioSteam	Float	Read	0.0 to 1.0		The ratio of Steam in device's Atmosphere
RatioSteamInput	Float	Read	0.0 to 1.0		The ratio of Steam in device's Input Atmosphere
RatioSteamOutput	Float	Read	0.0 to 1.0		The ratio of Steam in Combustion Centrifuge's Output Atmosphere
RatioLiquidCarbonDioxide	Float	Read	0.0 to 1.0		The ratio of Liquid Carbon Dioxide in device's Atmosphere
RatioLiquidCarbonDioxideInput	Float	Read	0.0 to 1.0		The ratio of Liquid Carbon Dioxide in device's Input Atmosphere
RatioLiquidCarbonDioxideOutput	Float	Read	0.0 to 1.0		The ratio of Liquid Carbon Dioxide in Combustion Centrifuge's Output Atmosphere
RatioLiquidPollutant	Float	Read	0.0 to 1.0		The ratio of Liquid Pollutant in device's Atmosphere
RatioLiquidPollutantInput	Float	Read	0.0 to 1.0		The ratio of Liquid Pollutant in device's Input Atmosphere
RatioLiquidPollutantOutput	Float	Read	0.0 to 1.0		The ratio of Liquid Pollutant in Combustion Centrifuge's Output Atmosphere
RatioLiquidNitrousOxide	Float	Read	0.0 to 1.0		The ratio of Liquid Nitrous Oxide in device's Atmosphere
RatioLiquidNitrousOxideInput	Float	Read	0.0 to 1.0		The ratio of Liquid Nitrous Oxide in device's Input Atmosphere
RatioLiquidNitrousOxideOutput	Float	Read	0.0 to 1.0		The ratio of Liquid Nitrous Oxide in Combustion Centrifuge's Output Atmosphere
ReferenceId	Integer	Read			Unique Reference Identifier for this object
RatioHydrogen	Float	Read	0.0 to 1.0		DEPRECATED
RatioLiquidHydrogen	Float	Read	0.0 to 1.0		DEPRECATED
RatioPollutedWater	Float	Read	0.0 to 1.0		The ratio of polluted water in device atmosphere
NameHash	Integer	Read			Provides the hash value for the name of the object as a 32 bit integer.

Template:Slots

Slot Name	Type	Index
Import	None	0
Export	None	1
Programmable Chip	Programmable Chip	2

Connection Name	Index
Chute Input	0
Chute Output	1
Data	2
Power	3
Pipe Input	4
Pipe Input	5