Pipe Digital Valve
From Unofficial Stationeers Wiki
Revision as of 22:27, 3 June 2024 by Kahsikmahn (talk | contribs) (Updated Wattage usage from 25 to 5 Watts)
Revision as of 22:27, 3 June 2024 by Kahsikmahn (talk | contribs) (Updated Wattage usage from 25 to 5 Watts)
 | |
| Properties | |
|---|---|
| Stacks | No |
| Recipe | |
| Created With | Hydraulic Pipe Bender, Fabricator |
| Cost | 2g Copper, 5g Steel, 3g Invar |
Contents
Pipe Digital Valve[edit]
Description[edit]
A valve which can be operated by logic network. Switching its "On" variable to 1 causes the valve to be fully open, switching to 0 closes the valve to completely close. Power usage: 0 Watts when off. 5 Watts when on.
Data Network Properties[edit]
These are all Data Network properties of this device.
Data Parameters[edit]
These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).
| Parameter Name | Data Type | Description |
|---|---|---|
| Lock | Boolean | Locks the Pipe Digital Valve, when set to 1. Unlocks it, when set to 0. |
| Setting | Float | Does not function. |
| On | Boolean | Turns the Pipe Digital Valve on, when set to 1. Turns it off, when set to 0. |
Data Outputs[edit]
These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.
| Output Name | Data Type | Description |
|---|---|---|
| Maximum | Integer | Returns 100. (Assumption) Returns the maximum throughput percentage of the Pipe Digital Valve. |
| Lock | Boolean | Returns whether the Pipe Digital Valve is locked. (0 for no, 1 for yes) |
| Error | Boolean | Returns whether the Pipe Digital Valve is currently flashing an error. (0 for no, 1 for yes) |
| Setting | Float | Returns a range from 0.0 to 100.0. Does not function. (Assumption) Returns the percentage of opening of the Pipe Digital Valve. |
| RequiredPower | Integer | Returns the current amount of power needed for the Pipe Digital Valve. |
| Ratio | Float | Returns a range from 0.0 to 1.0. Does not function. (Assumption) Returns the differential in pressure between the sides of the Pipe Digital Valve. |
| Prefab Hash | Integer | (Assumption) Returns (-1280984102) a unique type identifier for the Pipe Digital Valve. |
| Power | Boolean | Returns whether the Pipe Digital Valve is receiving power and is turned on. (0 for no, 1 for yes) |
| On | Boolean | Returns whether the Pipe Digital Valve is set to on. (0 for no, 1 for yes) |