Hydroponics Station

Kit (Hydroponic Station)

Recipe
Created With	Electronics Printer
Cost	5g Gold, 20g Copper, 10g Steel

Hydroponics Station

Operation
Power Usage	100 W (Grow Lights On)
Construction
Placed with	Kit (Hydroponic Station)
Placed on	Small Grid
Requires Frame	Yes
Stage 1
Deconstruction
Deconstructed with	Hand Drill
Item received	Kit (Hydroponic Station)

Usage

This item is used to grow crops, similar to the Hydroponic Tray, with the following differences:

• It requires frames for support.
• It has one pipe connection instead of 2, and only 5L of internal volume.
• It is slightly more expensive, but it comes with 4 grow slots, and takes up a 3x3 area.
• It includes a grow light which can grow all 4 crops without sunlight, but requires 100W of power when turned on and can't illuminate adjacent plants.
• It has a data output port, capable of reading plant status and pipe network data similar to a Hydroponics Device.

While its built-in grow light is inefficient compared to the dedicated Grow Light, it does not require Electrum, making it buildable without the need of a Furnace with pressure controls or trading.

Guide (Farming) provides additional info on how to setup farming with hydroponic station.

Data Network Properties

These are all Data Network properties of this device.

Data Parameters

These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).

Parameter Name	Data Type	Description
Setting	Integer
On	Boolean	Return whether the UV light of the station is on. (1 for on, 0 for off)

Data Outputs

These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Logic Name	Read Write	Data Type	Description
Power	Read	Boolean	Return whether the UV light of the station is on. (1 for on, 0 for off)
Error	Read
Pressure *	Read	Float	Pressure of the fluid alimenting the station.
Temperature *	Read	Float	In Kelvin. Temperature of the fluid alimenting the station.
Setting	Read Write	Integer
RatioOxygen*	Read	Float	Ratio of oxygen in the fluid alimenting the station.
RatioCarbonDioxide *	Read	Float
RatioNitrogen *	Read	Float
RatioPollutant *	Read	Float
RatioVolatiles *	Read	Float
RatioWater *	Read	Float
Maximum	Read	Integer	Value of 100.
Ratio	Read	Float	Seems to be the ratio between the Setting and the Maxium. So 0.5
On	Read Write	Boolean	Return whether the UV light of the station is on. (1 for on, 0 for off)
RequiredPower	Read	Integer	In watts. 0 if the lamp is off, 100 if it's on.
TotalMoles	Read
RatioNitrousOxide	Read
PrefabHash	Read
Combustion	Read
PressureOutput	Read
TemperatureOutput	Read
RatioOxygenOutput	Read
RatioCarbonDioxideOutput	Read
RatioNitrogenOutput	Read
RatioPollutantOutput	Read
RatioVolatilesOutput	Read
RatioWaterOutput	Read
TotalMolesOutput	Read
CombustionOutput	Read
RatioLiquidNitrogen	Read
RatioLiquidOxygen	Read
RatioLiquidVolatiles	Read
RatioSteam	Read
RatioLiquidCarbonDioxide	Read
ReatioLiquidPollutant	Read
RatioLiquidNitrousOxide	Read
ReferenceID	Read
RatioHydrogen	Read
RatioLiquidHydrogen	Read
RatioPollutedWater	Read
NameHash	Read

 * The Pressure, Temperature and ratios parameters are measured from the fluid alimenting the station, not from the surrounding atmosphere.

Data Outputs

These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Logic Slot Name	Values	Description
Occupied	0,1,2,3,4,5,6,7
OccupantHash	0,1,2,3,4,5,6,7
Quantity	0,1,2,3,4,5,6,7
Damage	0,1,2,3,4,5,6,7
Efficiency	0,1,2,3,4,5,6,7
Health	0,1,2,3,4,5,6,7
Growth	0,1,2,3,4,5,6,7
Class	0,1,2,3,4,5,6,7
MaxQuantity	0,1,2,3,4,5,6,7
Mature	0,1,2,3,4,5,6,7
PrefabHash	0,1,2,3,4,5,6,7
Seeding	0,1,2,3,4,5,6,7
SortingClass	0,1,2,3,4,5,6,7
ReferenceID	0,1,2,3,4,5,6,7
MaturityRatio	0,1,2,3,4,5,6,7
SeedingRatio	0,1,2,3,4,5,6,7
FreeSlots	0,1,2,3,4,5,6,7
TotalSlots	0,1,2,3,4,5,6,7