Air Conditioner

Air Conditioner

Operation
Power Usage	Up to 7000W based on temperature difference
Construction
Placed with	Kit (Atmospherics)
Placed on	Small Grid
Stage 1
Deconstruction
Deconstructed with	Hand Drill
Item received	Kit (Atmospherics)

Purpose

An Air Conditioner is a powered Atmospheric processor used to lower and raise the temperature of gases passed through it. Guide (Air Conditioning) provides additional information regarding the function, construction, and operation of an Air Conditioner.

Characteristics

• It has a manual power switch.
• It consumes 5W of Power per Tick when idle.
• It consumes a maximum of 7kW of Power per Tick when active.
• It has a separate Power Port and Data Port.
• It has a touchpad that provides manual temperature control.
• It has a pipe port (labelled "Input") for the gases that will be heated or cooled to the designated temperature.
• It has a pipe port (labelled "Output") for the gases that have been heated or cooled to the designated temperature.
• It has a pipe port (labelled "Waste") for gases to or from which heat will be transferred to raise or lower the input gases' temperature.
• If the Waste pipe network is below 100kpa, input gases will be diverted to the Waste pipe network to raise its pressure.
• It can raise or lower gas temperature within a range from -99°C to 99°C.

User Interface

An Air Conditioner provides the following user interface:

Name	Type	Function
Temperature	Display	Displays the current output temperature setting
+	Touchkey	Increase the current output temperature setting by 10°C and by 1°C with the Quantity Modifier key pressed.
-	Touchkey	Decrease the current output temperature setting by 10°C and by 1°C with the Quantity Modifier key pressed.
Start	Touchkey	Switches Air Conditioner between idle and active.
On/Off	Switch	Switches Air Conditioner between turned on or turned off.

Data Network Properties

These are all Data Network properties of this device.

Data Parameters

These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).

Parameter Name	Data Type	Description
Open	Boolean	Activates the Air Conditioner when set to 1. Idles it when set to 0.
Mode	Integer	(Unknown) (Judging by the "Mode" output, it accepts values in the range 0-2.)
Lock	Boolean	Locks the Air Conditioner when set to 1. Unlocks it when set to 0.
On	Boolean	Powers on the Air Conditioner on when set to 1. Powers off when set to 0.

Data Outputs

These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Output Name	Data Type	Description
Power	Boolean	Returns whether the Air Conditioner is turned on and receives power. (0 for no, 1 for yes)
Open	Boolean	Returns whether the Air Conditioner is active or idle. (0 for no, 1 for yes)
Mode	Integer	(Unknown) (Returns output in the range 0-2, equivalent to the input of the "Mode" parameter.)
Error	Boolean	Returns whether the Air Conditioner is flashing an error. (0 for no, 1 for yes)
Lock	Boolean	Returns whether the Air Conditioner is locked. (0 for no, 1 for yes)
On	Boolean	Returns whether the Air Conditioner is turned on. (0 for no, 1 for yes)
RequiredPower	Integer	Returns the current amount of power in Watts required by the Air Conditioner.

See Also

• Guide (Air Conditioner)

• Kit (Atmospherics)
• Portable Air Conditioner
• Radiator
• Wall Cooler
• Wall Heater