Electrolyzer

Electrolyzer

Operation
Power Usage	3600W
Construction
Placed with	Kit (Atmospherics)
Placed on	Small Grid
Stage 1
Deconstruction
Deconstructed with	Hand Drill
Item received	Kit (Atmospherics)

Storing water got you down? At the expense of power, you can turn that excess water into a bunch of heat and a somewhat risky mix of Oxygen and Volatiles using the new Electrolysis Machine. Available on the existing Atmospherics kit with Air Conditioners and Filtration machines.

Usage

1. Select Kit (Atmospherics) for placement, and change the variant to Electrolyzer.
2. Connect liquid pipe to the Input liquid connection to transfer water into the machine.
3. Connect gas pipe to the Output gas connection to remove the created H2 and O2.

Notes

• H2 and O2 are produced mixed together in a single gas pipe, creating a dangerous fuel mixture that can be directly used in a furnace.
• Assuming in vacuum conditions, the Electrolyzer always outputs Oxyhydrogen (ie fuel) at 20 Celcius. This may be exploited to delete heat from an AC system by superheating the input water.
• The conversion rate is 1 mol H2O produces 1 mol O2 and 2 mols H2.
• If the temperature inside the Electrolyzer reaches 32°C (50C?), autoignition occurs, creating heat, and converting virtually all O2 and H2 inside the machine into CO2 and X. Keep this in mind on high-temperature worlds.
• If autoignition occurs, it doesn't propagate to the gas pipe connected to the Electrolyzer, so the gas already removed is safe, provided it is insulated from further temperature increases.
• The Electrolyzer's internal volume is generally separated from the pipe network, and it can release its content only if the machine is turned on.

Data Network Properties

These are all Data Network properties of this device.

Data Parameters

These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).

Parameter Name	Data Type	Description
Lock	Boolean	Locks the Electrolyzer , when set to 1. Unlocks it, when set to 0.
On	Boolean	Turns the Electrolyzer on, when set to 1. Turns it off, when set to 0.

Data Outputs

These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Output Name	Data Type	Description
Power	Boolean	Returns whether the Electrolyzer is turned on and receives power. (0 for no, 1 for yes)
Error	Boolean	Returns whether the Electrolyzer is flashing an error. (0 for no, 1 for yes)
Lock	Boolean	Returns whether the Electrolyzer is locked. (0 for no, 1 for yes)
On	Boolean	Returns whether the Electrolyzer is turned on. (0 for no, 1 for yes)
RequiredPower	Integer	Returns the current amount of power, required by the Electrolyzer, in Watts.