Actions

Difference between revisions of "Rocket Engines"

From Unofficial Stationeers Wiki

(Added relevant math for thrust and weight.)
(cleanup links)
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:
  
 
Rocket Engines give you their max output in kN with this you can calculate what they can reasonably carry into orbit depending on the planet or moon you are on. Force = Mass * Acceleration. Acceleration is equal to the planet's gravity, Mass is given in kg per part of the rocket, and Force is kN. If your thrust force listed below is less than the weight of the rocket in kN then you will not even take off. It is better to have a thrust much higher than the weight of the rocket or else you risk running out of fuel on launch and on landing.
 
Rocket Engines give you their max output in kN with this you can calculate what they can reasonably carry into orbit depending on the planet or moon you are on. Force = Mass * Acceleration. Acceleration is equal to the planet's gravity, Mass is given in kg per part of the rocket, and Force is kN. If your thrust force listed below is less than the weight of the rocket in kN then you will not even take off. It is better to have a thrust much higher than the weight of the rocket or else you risk running out of fuel on launch and on landing.
 +
 +
Liquid propellants bring greater efficiencies. Using Nitrous Oxide as oxidizer provides excessive thrust values. Keep in mind that N2O fuel mix is 1.9375 times heavier while thrust boost is around 1.5-1.7. Engine efficiency determines "bonus" thrust multiplier, meaning engine with higher efficiency will give more thrust consuming same amount of fuel. Thus using liquid engines is more favorable if one can cool fuel down, moreover Pressure Fed Engines consume fuel inversely proportional to its temperature. On the other hand if [[Volatiles]] and [[Oxygen]] are in excess (e.g. farm on [[Vulcan]]) is may be much easier to opt for Pressure Fed Gas Engine. It will provide ~40kN at 20°C.
  
 
<div style="width:auto; overflow:auto;">
 
<div style="width:auto; overflow:auto;">
 
   {| class="wikitable sortable" style="width:100%;"
 
   {| class="wikitable sortable" style="width:100%;"
     ! Name
+
     ! rowspan=2 | Name
     ! Base Power Usage
+
     ! rowspan=2 | Base Power Usage
     ! Rocket Mass Contribution
+
     ! rowspan=2 | Rocket Mass Contribution
     ! Max Thrust
+
     ! rowspan=2 | Max Thrust
     ! Efficiency
+
     ! colspan=2 | Real Max Thrust
     ! Exhaust Velocity
+
    ! rowspan=2 | Efficiency
 +
     ! rowspan=2 | Exhaust Velocity
 
     |-
 
     |-
  
     ! <b>[[Pressure_Fed_Liquid_Engine|Pressure Fed Liquid Engine]]</b>
+
     ! Using O2
     | 20W
+
     ! Using N2O
    | 500kg
 
    | 29,2kN
 
    | 160%
 
    | 6,18km/s (Isp: 631s)
 
 
     |-
 
     |-
  
     ! <b>[[Pressure_Fed_Gas_Engine|Pressure Fed Gas Engine]]</b>
+
     ! <b>[[Pressure Fed Gas Engine]]</b>
 
     | 10W
 
     | 10W
 
     | 500kg
 
     | 500kg
 
     | 40,3kN
 
     | 40,3kN
 +
    | 61,0kN
 +
    | 41,9kN<ref>N2O must be much hotter to avoid condensing therefore decreasing pumping rate</ref>
 
     | 96%
 
     | 96%
 
     | 3,86km/s (Isp: 394s)
 
     | 3,86km/s (Isp: 394s)
 
     |-
 
     |-
  
     ! <b>[[Pumped_Gas_Rocket_Engine|Pumped Gas Engine]]</b>
+
     ! <b>[[Pumped Gas Engine]]</b>
 
     | 200W
 
     | 200W
 
     | 500kg
 
     | 500kg
 
     | 16,2kN
 
     | 16,2kN
 +
    | 16,5kN
 +
    | 24,5kN
 
     | 100%
 
     | 100%
 
     | 4,02km/s (Isp: 411s)
 
     | 4,02km/s (Isp: 411s)
 
     |-
 
     |-
  
     ! <b>[[Pumped_Liquid_Engine|Pumped Liquid Engine]]</b>
+
     ! <b>[[Pumped Liquid Engine]]</b>
 
     | 200W
 
     | 200W
 
     | 500kg
 
     | 500kg
 
     | 17,6kN
 
     | 17,6kN
 +
    | 18,7kN
 +
    | 31,3kN
 
     | 140%
 
     | 140%
 
     | 5,47km/s (Isp: 559s)
 
     | 5,47km/s (Isp: 559s)
 
     |-
 
     |-
  
     ! colspan="6" | <i>Update 0.2.4726.21691 - 18/01/2024</i> <span class="right">[[Rocket_Engines]]</span>
+
    ! <b>[[Pressure Fed Liquid Engine]]</b>
 +
    | 20W
 +
    | 500kg
 +
    | 29,2kN
 +
    | 43,4kN - 38,1kN
 +
    | 74,5kN - 61,3kN
 +
    | 160%
 +
    | 6,18km/s (Isp: 631s)
 +
    |-
 +
 
 +
     ! colspan=8 | <i>Update 0.2.4726.21691 - 18/01/2024</i> <span class="right">[[Rocket_Engines]]</span>
 
   |}
 
   |}
 
</div>
 
</div>

Latest revision as of 10:22, 26 August 2024


Rocket Engines give you their max output in kN with this you can calculate what they can reasonably carry into orbit depending on the planet or moon you are on. Force = Mass * Acceleration. Acceleration is equal to the planet's gravity, Mass is given in kg per part of the rocket, and Force is kN. If your thrust force listed below is less than the weight of the rocket in kN then you will not even take off. It is better to have a thrust much higher than the weight of the rocket or else you risk running out of fuel on launch and on landing.

Liquid propellants bring greater efficiencies. Using Nitrous Oxide as oxidizer provides excessive thrust values. Keep in mind that N2O fuel mix is 1.9375 times heavier while thrust boost is around 1.5-1.7. Engine efficiency determines "bonus" thrust multiplier, meaning engine with higher efficiency will give more thrust consuming same amount of fuel. Thus using liquid engines is more favorable if one can cool fuel down, moreover Pressure Fed Engines consume fuel inversely proportional to its temperature. On the other hand if Volatiles and Oxygen are in excess (e.g. farm on Vulcan) is may be much easier to opt for Pressure Fed Gas Engine. It will provide ~40kN at 20°C.

Name Base Power Usage Rocket Mass Contribution Max Thrust Real Max Thrust Efficiency Exhaust Velocity
Using O2 Using N2O
Pressure Fed Gas Engine 10W 500kg 40,3kN 61,0kN 41,9kN[1] 96% 3,86km/s (Isp: 394s)
Pumped Gas Engine 200W 500kg 16,2kN 16,5kN 24,5kN 100% 4,02km/s (Isp: 411s)
Pumped Liquid Engine 200W 500kg 17,6kN 18,7kN 31,3kN 140% 5,47km/s (Isp: 559s)
Pressure Fed Liquid Engine 20W 500kg 29,2kN 43,4kN - 38,1kN 74,5kN - 61,3kN 160% 6,18km/s (Isp: 631s)
Update 0.2.4726.21691 - 18/01/2024 Rocket_Engines
  1. N2O must be much hotter to avoid condensing therefore decreasing pumping rate