Actions

Sleeper

From Unofficial Stationeers Wiki

Revision as of 05:06, 11 August 2020 by Neouni (talk | contribs)
Other languages:
English
Kit (Sleeper)
ItemKitSleeper.png
Recipe
Created With Hydraulic Pipe Bender Mk2
Cost 10g Iron, 2g Gold, 3g Copper
Sleeper
Operation
Power Usage 100W
Construction
Placed with Kit (Sleeper)
Placed on Small Grid
Stage 1
Deconstruction
Deconstructed with Hand Drill
Item received Kit (Sleeper)

Description

A Sleeper stops the hunger timer while inside. Once properly setup and maintained, allows for controlled sleep giving a safe place to log off. No surrounding atmosphere needed to operate, can go in with full suit and open visor to use.

Basic Setup Example

Sleeper Basic Setup Example.png

  • Wire it up.
  • put your suit airtank in the system (will use 4000kpa from it to charge the pipes).
  • Then turn on and jump in for a good nights rest.

This design works because the sleeper connector is bidirectional, and it needs a constant trickle of air flowing to draw out the co2 and clean it up.

Once you build larger systems you might want to feed the air at a proper temperature too, but fresh spawned characters have 20c oxygen tanks.

Advanced Setup Example

Sleeper advanced setup

This setup is fully autonomous and will take care of maintaining temperature, pressure as well filtering.

  • Pressure Regulator is set to desired pressure (100kPa)
  • It is important to place AC and Filtration in the specified order
  • Oxygen Tank could be any source of oxygen Build the Filtration, put in oxygen filter so it throws out the rest
  • Set AC temp to something suitable (20°C)
  • Build Heat sink similar to Guide (Air Conditioning), use any suitable coolant, but make sure to have at least 100kPa in heat sink pipe.