Actions

Difference between revisions of "Hardsuit"

From Unofficial Stationeers Wiki

(Added extra information, removed missing image)
m (Spelling)
Line 15: Line 15:
  
 
==Usage==
 
==Usage==
Your suit must be worn with a suitable helmet to function properly.  You must insert suitable gas canisters and filters into the suit's slot (see below).  These will need to be manually changed on a periodic basis, althoguh the canisters can also be recharged/drained using a fully-supplied [[Suit Storage]] rack.
+
Your suit must be worn with a suitable helmet to function properly.  You must insert suitable gas canisters and filters into the suit's slot (see below).  These will need to be manually changed on a periodic basis, although the canisters can also be recharged/drained using a fully-supplied [[Suit Storage]] rack.
  
Your suit readouts are normally dispayed at the top-right of the screen.  Your suit functions can be accessed by pressing the Number ''''3'''' key.  This will bring up a panel showing the suit's slots and its various settings.  These only function when wearing a suitable closed helmet, and are as follows:
+
Your suit readouts are normally displayed at the top-right of the screen.  Your suit functions can be accessed by pressing the Number ''''3'''' key.  This will bring up a panel showing the suit's slots and its various settings.  These only function when wearing a suitable closed helmet, and are as follows:
*'''A/C On / Off'''  (i.e. Temperature control on/off)
+
*'''A/C On / Off'''  (Temperature control on/off)
 
*'''Filters On / Off'''
 
*'''Filters On / Off'''
 
*'''Air On / Off'''
 
*'''Air On / Off'''
Line 28: Line 28:
 
==Slots==
 
==Slots==
 
Contains 8 slots:
 
Contains 8 slots:
* 1x '''Air Tank''' - Insert a [[Canister]] or [[Gas Canister (Smart)]] with a breatable gas mix (for example [[Oxygen|O2]], [[Air]], [[Air 20/80]] or [[Nitrox 35/65]])
+
* 1x '''Air Tank''' - Insert a [[Canister]] or [[Gas Canister (Smart)]] with a breathable gas mix (for example [[Oxygen|O2]], [[Air]], [[Air 20/80]] or [[Nitrox 35/65]])
 
* 1x '''Waste Tank''' - Insert an empty [[Canister]] or [[Gas Canister (Smart)]] where gases removed by the [[Filter]]s will be stored
 
* 1x '''Waste Tank''' - Insert an empty [[Canister]] or [[Gas Canister (Smart)]] where gases removed by the [[Filter]]s will be stored
 
* 1x '''Life Support''' - Insert a charged [[Battery Cell]] (ideally Large or Nuclear)
 
* 1x '''Life Support''' - Insert a charged [[Battery Cell]] (ideally Large or Nuclear)
 
* 1x '''Processor''' - Optionally allowing for a programmed [[Integrated_Circuit_(IC10)|Integrated Circuit (IC10)]]
 
* 1x '''Processor''' - Optionally allowing for a programmed [[Integrated_Circuit_(IC10)|Integrated Circuit (IC10)]]
* 4x '''[[Filter]]s''' - Insert at least one [[Carbon Dioxide|CO2]] Filters (if Human), plus others depending on your breathjable gas mix (usually [[N2|Nitrogen]])
+
* 4x '''[[Filter]]s''' - Insert at least one [[Carbon Dioxide|CO2]] Filters (if Human), plus others depending on your breathable gas mix (usually [[N2|Nitrogen]])
  
 
==Notes==
 
==Notes==
* Suit pressure set to 50-100 KPa (0.5 to 1 Earth atmospheres), Humans in-game tolerating 11 to ~250kPa and survivng 11 to ~300kPA)
+
* Suit pressure set to 50-100 KPa (0.5 to 1 Earth atmospheres), Humans in-game tolerating 11 to ~250kPa and surviving 11 to ~300kPA)
* Suit temperature is normally set to 18-21°C, Humans in-game prefering 10-29°C, tolertaing 0-39°C and surviving around -10 to 49°C  
+
* Suit temperature is normally set to 18-21°C, Humans in-game preferring 10-29°C, tolerating 0-39°C and surviving around -10 to 49°C  
 
* Additional key bindings to control your suit functions can be set in the Game Settings ---> Controls.
 
* Additional key bindings to control your suit functions can be set in the Game Settings ---> Controls.
  
* The maximum allowed pressure the Filtes can cope with in the Waste Tank is 4052kPa (well below its maximum pressure). Low/critical Oxygen warnings will occur close to this value as your Filters cease to function.
+
* The maximum allowed pressure the filters can cope with in the Waste Tank is 4052kPa (well below its maximum pressure). Low/critical Oxygen warnings will occur close to this value as your Filters cease to function.
 
* The default filter is the [[Carbon Dioxide|CO2]] filter, a gas generated by the Human character when consuming breathable gas
 
* The default filter is the [[Carbon Dioxide|CO2]] filter, a gas generated by the Human character when consuming breathable gas
 
* Make sure if you aren't using 100% Oxygen in your breathing gas that you add additional Filters! E.g. if you put the common "Air" mixture of 25% [[Oxygen]] + 75% [[Nitrogen]] into your tank, the Nitrogen would accumulate in your suit/helmet over time and suffocate you unless you have a [[N2|Nitrogen]] filter to remove this.
 
* Make sure if you aren't using 100% Oxygen in your breathing gas that you add additional Filters! E.g. if you put the common "Air" mixture of 25% [[Oxygen]] + 75% [[Nitrogen]] into your tank, the Nitrogen would accumulate in your suit/helmet over time and suffocate you unless you have a [[N2|Nitrogen]] filter to remove this.
* If you have  the correct filters and breathable gas but are still expereicning problems, refer to the 'Flush' function on your [[Space Helmet]]
+
* If you have  the correct filters and breathable gas but are still experiencing problems, refer to the 'Flush' function on your [[Space Helmet]]
  
* It is theoreticlly possible to mix [[EVA Suit]] elements and [[Hardsuit]] elements, although this is relatively uncommon
+
* It is theoretically possible to mix [[EVA Suit]] elements and [[Hardsuit]] elements, although this is relatively uncommon
 
* Damaged suits can be recycled (assuming you have a new one to use!)
 
* Damaged suits can be recycled (assuming you have a new one to use!)
  

Revision as of 11:48, 24 September 2020

Hardsuit
Recipe
Created With Fabricator
Cost 2g Gold, 10g Steel, 8g Lead, 20g Invar
Max Pressure 202.65 kPa
Volume 10 L


Description

Used in conjunction with a Hardsuit Helmet to go outside a pressurized and breathable environment. It features adjustable pressure and air conditioning (temperature) settings, as well as an warning system that will alert the occupant should the atmosphere inside the suit become hazardous. It can also carry a Hardsuit Backpack for extra storage, or a Hardsuit Jetpack for additional storage and jumpjet capabilities.

The Hardsuit has more armor than the EVA Suit, features one extra Filter slot and the ability to accept Integrated Circuit (IC10) chips. It is however much more expensive to produce.

Usage

Your suit must be worn with a suitable helmet to function properly. You must insert suitable gas canisters and filters into the suit's slot (see below). These will need to be manually changed on a periodic basis, although the canisters can also be recharged/drained using a fully-supplied Suit Storage rack.

Your suit readouts are normally displayed at the top-right of the screen. Your suit functions can be accessed by pressing the Number '3' key. This will bring up a panel showing the suit's slots and its various settings. These only function when wearing a suitable closed helmet, and are as follows:

  • A/C On / Off (Temperature control on/off)
  • Filters On / Off
  • Air On / Off
  • Pressure Up / Down (with a range of 0kPA to 202kPa, or 0-2 Earth atmospheres)
  • Temperature Up / Down (with a range of 0°C to 60°C)

Your suit Battery will also power (and be drained by) the light in any attached helmet. If damaged, your suit can be patched by holding Duct Tape in your right hand and holding the right mouse button. The colour of an (unworn) suit can be changed using Spray Paint.

Slots

Contains 8 slots:

Notes

  • Suit pressure set to 50-100 KPa (0.5 to 1 Earth atmospheres), Humans in-game tolerating 11 to ~250kPa and surviving 11 to ~300kPA)
  • Suit temperature is normally set to 18-21°C, Humans in-game preferring 10-29°C, tolerating 0-39°C and surviving around -10 to 49°C
  • Additional key bindings to control your suit functions can be set in the Game Settings ---> Controls.
  • The maximum allowed pressure the filters can cope with in the Waste Tank is 4052kPa (well below its maximum pressure). Low/critical Oxygen warnings will occur close to this value as your Filters cease to function.
  • The default filter is the CO2 filter, a gas generated by the Human character when consuming breathable gas
  • Make sure if you aren't using 100% Oxygen in your breathing gas that you add additional Filters! E.g. if you put the common "Air" mixture of 25% Oxygen + 75% Nitrogen into your tank, the Nitrogen would accumulate in your suit/helmet over time and suffocate you unless you have a Nitrogen filter to remove this.
  • If you have the correct filters and breathable gas but are still experiencing problems, refer to the 'Flush' function on your Space Helmet
  • It is theoretically possible to mix EVA Suit elements and Hardsuit elements, although this is relatively uncommon
  • Damaged suits can be recycled (assuming you have a new one to use!)

Data Network Properties

These are all Data Network properties of this device.

The Hardsuit is uniquely capable of accepting an Integrated Ciruit (IC10). Within a Hardsuit, this IC cannot toggle itself off and will run as long as there is battery power in the suit, until the IC is removed. It has these unique logic variables and interactions (along with the standard variables).

Data Parameters

These are all parameters, that can be written to with a Logic Writer, Batch Writer, or Integrated Circuit (IC10). The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.

Parameter Name Data Type Description
On boolean Controls A/C power for suit.
Filtration boolean Controls Filtration power for suit.
AirRelease boolean Controls Air power for suit.
PressureSetting number Controls target pressure for suit. Only works while helmet is closed.
TemperatureSetting number Controls target temperature for suit.
Error boolean Controls error state for suit.
d0 device Interface for suit helmet
d1 device Interface for backpack or jetpack

Data Outputs

These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Output Name Data Type Description
On boolean Controls A/C power for suit.
Filtration boolean Whether Filtration is enabled for the suit.
AirRelease boolean Whether Air flow is enabled for the suit.
PressureSetting number The target pressure for suit.
TemperatureSetting number The target temperature for suit.
PressureExternal number The air pressure outside of the suit.
TemperatureExternal number The air temperature outside of the suit.
Error boolean The suit's error state.
PositionX number The suit's X coordinate position.
PositionY number The suit's Y coordinate position.
PositionZ number The suit's Z coordinate position.
VelocityMagnitude number The suit's relative velocity magnitude.
VelocityRelativeX number The suit's relative X velocity.
VelocityRelativeY number The suit's relative Y velocity.
VelocityRelativeZ number The suit's relative Z velocity.
d0 device Interface for suit helmet
d1 device Interface for backpack or jetpack