Actions

Furnace

From Unofficial Stationeers Wiki

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎русский
Kit (Furnace)
ItemKitFurnace.png
Recipe
Created With Autolathe, Fabricator
Cost 30g Iron, 10g Copper
Logic Parameters
  • Open
  • Pressure
  • Temperature
  • Lock
  • Setting
  • Reagents
  • RatioOxygen
  • RatioCarbonDioxide
  • RatioNitrogen
  • RatioPollutant
  • RatioVolatile
  • RatioWater
  • Maximum
  • Ratio
  • ImportQuantity
  • ImportSlotOccupant
  • ExportQuantity
  • ExportSlotOccupant
Volume 250 L
Furnace
Furnace.jpg
Construction
Placed with {{{placed_with_item}}}
Placed on {{{placed_on_grid}}}

Description

Used to smelt ingots and alloys using an oxygen/volatile gas mix. Ice (Oxite) and Ice (Volatiles) can be manually input directly in the furnace in order to create crude gas mixtures, or to be directly extracted as an easy trick for melting the ice.

If the contents of the furnace are ejected without reaching the required temperature and pressure for smelting, they'll come out as Reagent which can be processed in a Centrifuge to recover the raw ores.

Recipes

While smelting steel is easily achieved with ice, other recipes usually require a working piping setup. This can be done by separating gases into tanks using atmospheric units and piping individual gases through a mixer and a Pressure Regulator or a Pipe Volume Pump connected to the furnace input. Output should also be extracted and vented/recycled through a backpressure regulator to keep furnace pressure in check. The optimal gas mix that burns completely is 1 part (33.3%) oxygen to 2 parts (66.6%) volatiles, other mixes would also work but leave you with leftover oxygen or volatiles depending on the percentages used. It could also result in lower temperature if that is desired, but you could also use a volume pump with a lower fuel input setting.


Make sure to put the fuel in first, then press the activate button. Afterwards, put in the ingredients, and press the handle after you see the "will produce" while hovering over the furnace.

Item Pressure (kPa) Temp (K) Temp (C) Ingredients Notes
Min Max Min Max Min Max Ratio Ore
Lead 100 100,000 300 100,000 26.85 99,726.85 1 Lead
Gold 600 326.85 Gold
Copper 600 326.85 Copper
Silver 600 326.85 Silver
Nickel 800 526.85 Nickel
Iron 900 626.85 Iron
Silicon 900 626.85 Silicon
Solder 300 3 500 300 2 000 26.85 1 726.85 1:1 Iron:Lead Can be achieved by dropping 2 oxite and 1 volatile
Steel 100 100 000 600 100 000 326.85 99,726.85 3:1 Iron:Carbon(Coal) Can easily be achieved by just dropping 1 oxite and 2 volatiles
Electrum 800 2 400 700 10 000 426.85 9726.85 1:1 Gold:Silver Can be achieved by just dropping 1 oxite and 2 volatiles
Invar 6 000 7 000 1 200 1 500 926.85 1326.855 1:1 Iron:Nickel Can be achieved by just dropping 4 volatiles and 2 oxite (for 100 invar ingots)
Constantan 100 10 000 1 000 1 500 1 0005 1 5005 1:1 Copper:Nickel Can be achieved by dropping 4 oxite and 1 volatile

Some example fuel mixes

Prime AFR In: Mols Result Out: Mols
H2 O2 Press. Temp O2 H2 Co2 X
100 kPa 2:1 29 14 2 135 1 953 1 3 82 33
200 kPa 2:1 59 29 4 500 2 000 1 5 169 80
200 kPa 3:1 65 21 3 400 1 900 2 26 118 52
200 kPa 4:1 72 18 3 000 1 800 1 40 99 42
200 kPa 1:1 43 43 3 493 1 917 22 2 127 59
200 kPa 1:4 17 68 1 646 1 319 63 2 50 18
300 kPa 2:1 86 42 6 850 2 109 2 7 242 115
500 kPa 2:1 143 69 11 814 2 150 3 11 400 193

Data Network Properties

These are all Data Network properties of this device.

Data Parameters

These are all parameters, that can be written to with a Logic Writer or a Batch Writer. The outputs are listed in the order a Logic Writer's "VAR" setting cycles through them.

Parameter Name Data Type Description
Open Boolean Opens the Furnace, when set to 1. Closes it, when set to 0.
Activate Boolean Activates the Furnace, when set to 1.
Lock Boolean Locks the Furnace, when set to 1. Unlocks it when set to 0.
Setting Float (Unknown) Affects the Setting output.

Data Outputs

These are all parameters, that can be read with a Logic Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Output Name Data Type Description
Open Boolean Returns whether the Furnace is open. (0 for no, 1 for yes)
Pressure Float Returns the pressure in the Furnace in kilo pascal.
Temperature Float Returns the temperature in the Furnace in kelvin.
Lock Boolean Returns whether the Furnace is locked.
Setting Float (Unknown) Affected by the Setting parameter.
Reagents Float Returns the amount of reagents (smeltable ores, not counting ice) in the Furnace, in grams.
RatioOxygen Float Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of oxygen in the Furnace.
RatioCarbonDioxide Float Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of carbon dioxide in the Furnace.
RatioNitrogen Float Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of nitrogen in the Furnace.
RatioPollutant Float Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of pollutant in the Furnace.
RatioVolatiles Float Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of volatiles in the Furnace.
RatioWater Float Returns a range from 0.0 to 1.0. Returns the percentage ratio of the amount of water in the Furnace.
Maximum Integer (Unknown) Returns 100.
Ratio Float (Unknown) Returns 0.5.
ImportQuantity Float Returns the amount of items in the import slot of the Furnace, which are currently smelted, in grams.
ImportSlotOccupant Boolean Returns whether there is something in the import slot of the Furnace, being smelted. (0 for no, 1 for yes)
ExportQuantity Float Returns the amount of items in the export slot of the Furnace, in grams. (Only briefly returns a value, when the Furnace is opened and items are exported.)
ExportSlotOccupant Boolean Returns whether there is something in the export slot of the Furnace. (Only briefly returns a value, when the Furnace is opened and items are exported.)