Furnace

Kit (Furnace)

Recipe
Created With	Autolathe, Fabricator
Cost	30g Iron, 10g Copper
Logic Parameters	Open Pressure Temperature Lock Setting Reagents RatioOxygen RatioCarbonDioxide RatioNitrogen RatioPollutant RatioVolatile RatioWater Maximum Ratio ImportQuantity ImportSlotOccupant ExportQuantity ExportSlotOccupant
Volume	250 L

Furnace

Construction
Placed with	{{{placed_with_item}}}
Placed on	{{{placed_on_grid}}}

Description

Used to smelt ingots and alloys using an oxygen/volatile gas mix. Ice (Oxite) and Ice (Volatiles) can be manually input directly in the furnace in order to create crude gas mixtures, or to be directly extracted as an easy trick for melting the ice.

Recipes

While smelting steel is easily achieved with ice, other recipes usually require a working piping setup. This can be done by separating gases into tanks using atmospheric units and piping individual gases through a mixer and a Pressure Regulator or a Pipe Volume Pump connected to the furnace input. Output should also be extracted and vented/recycled through a backpressure regulator to keep furnace pressure in check. The optimal gas mix that burns completely is 1 part (33.3%) oxygen to 2 parts (66.6%) volatiles, other mixes would also work but leave you with leftover oxygen or volatiles depending on the percentages used. It could also result in lower temperature if that is desired, but you could also use a volume pump with a lower fuel input setting.

Item	Pressure (kPa)		Temp (K)		Ingredients		Notes
	Min	Max	Min	Max	Ratio	Ore
Lead	100	100 000	300	100 000	1	Lead
Gold			600		1	Gold
Copper			600		1	Copper
Silver			600		1	Silver
Nickel			800		1	Nickel
Iron			900		1	Iron
Silicon			900		1	Silicon
Solder	300	3 500	300	2 000	1:1	Iron:Lead	Can be achieved by dropping 2 oxite and 1 volatile
Steel	100	100 000	600	100 000	3:1	Iron:Carbon(Coal)	Can easily be achieved by just dropping 1 oxite and 2 volatiles
Electrum	800	2 400	700	10 000	1:1	Gold:Silver	Can be achieved by just dropping 1 oxite and 2 volatiles
Invar	6 000	7 000	1 200	1 500	1:1	Iron:Nickel	Can be achieved by just dropping 4 oxite and 2 volatiles
Constantan	100	10 000	1 000	1 500	1:1	Copper:Nickel	can be achieved by dropping 4 oxite and 1 volatile

Some example fuel mixes

Prime	AFR	In: Mols		Result		Out: Mols
		H2	O2	Press.	Temp	O2	H2	Co2	X
100 kPa	2:1	29	14	2 135	1 953	1	3	82	33
200 kPa	2:1	59	29	4 500	2 000	1	5	169	80
200 kPa	3:1	65	21	3 400	1 900	2	26	118	52
200 kPa	4:1	72	18	3 000	1 800	1	40	99	42
200 kPa	1:1	43	43	3 493	1 917	22	2	127	59
200 kPa	1:4	17	68	1 646	1 319	63	2	50	18
300 kPa	2:1	86	42	6 850	2 109	2	7	242	115
500 kPa	2:1	143	69	11 814	2 150	3	11	400	193